TORONTO, Sept. 8 /CNW/ – Fletcher Nickel Inc. (TSX: FL) reports that the compilation of data from its drilling campaign at the Texmont Mine has been concluded and modeled and that initial metallurgical and refining test results have also been received. Large-tonnage near-surface Nickel resource extends north of Texmont Mine The geological assessment of the data has determined that a potentially large- tonnage nickel deposit, which may be mineable by open pit, has been …

Problem: The DoD spends tens of billions of dollars each year on corrosion & wear prevention and repair. Many technologies are employed for different alloys and environments. Several commonly used protection technologies have adverse environmental effects. Solution: The carbonyl process is a century old process by which certain transition elements can be extracted or removed by carbon monoxide gas at a particular temperature, or deposited on most substrates at another temperature. The process is …

CVMR’s process for refining of Ferralite and Saprolite ore maximizes value of the ores by producing value added products. Ferralite ore A typical Ferralite ore contains 40-45% of Iron, 1-1.5% of Nickel, 0.04-0.10% of Co (potentially Copper, PGE and Rare earth elements). * Published with permission of the client.

The Carbonyl facility at Jilin was designed, engineered and constructed by CVMR Corporation. CVMR is a shareholder in the Jilin facility and has been producing nickel and iron powders and variety of nano-powders over the past 15 years. Despite the downturn in the commodities market, the demand for various metal powders remains quite strong and in certain cases actually increasing. The latest China Jilin metallurgical industry development plan proposed the development priorities and layout. …

Production process of carbonyl nickel is not a new technology and has study history for 100 years. China’s research time is about tens of years. Refining of nickel carbonyl is a simple process with low energy consumption and high extraction rate. It also conducive to non-precious metal waste environmental enrichment process and can produce high-purity nickel balls, metal powder, alloy powder, powder coated, foam nickel and nano nickel powder. But within a long time, …

Carbonyl Iron Less Toxic and Better Tolerated than Ferrous Iron Slower to Absorb With ferrous iron, generally all iron is available for absorption. However, with carbonyl iron, only a small percentage is available for absorption.1,2 The rate at which your body absorbs carbonyl iron depends on the production of gastric acid (which is required to make carbonyl iron soluble), and the balance between the iron being dissolved and absorbed by your intestines. This means …